Fine-tune
your alignment!
for better handling and more even tire wear
49.99- 1989-90 SHO- MOOG HD Adjustable front strut
mount
Adjustable eccentric center!
Allow for up to +/- 1.25deg caster/camber change per side.
2 required
Made
in USA
49.99- 1991-95 SHO- MOOG HD Adjustable front strut mount
Adjustable eccentric center!
Allow for up to +/- 1.25deg caster/camber change per side.
2 required
Made
in USA
129.99/pair- INGALLS Adjustable Front Tension Strut Rods
1989-95
Taurus/SHO/Sable
Adjustable length via long threaded ends
Allow for up to
+/- 2deg caster change
Replace your worn/rusted front tension strut rods
Fine-tune your front alignment!
Made in
USA
89.99/set- TPR tension strut rod bushing set
1989-95
Taurus/SHO/Sable
Does both ends of all (4) tension strut rods
HD replacement plates/washers are also included (except
at front TSR-to-LCA)
Made in USA
This set sells for $200.+ elsewhere!
189.99/set of 4- INGALLS Adjustable HD Rear control
arms/links
1989-99 Taurus/SHO/Sable
Forged tubular steel with length-adjustable threaded ends
Allow
for up to +/- 2deg camber/toe change
Superior to stock and GM replacement arms/links.
Replace
your weak stamped-steel stock arms and fine-tune your rear alignment!
Made in USA
72.99- MOOG Front subframe/crossmember repair kit
(2 required)
1989-95 Taurus/SHO/Sable
HD permanent repair for front TSR-to-subframe/crossmember
mount!
Precision threaded components replace loose/damaged tension strut
rod bushing receiver cup.
Get rid of that front-end clunking and rattling!
Detailed instructions included.
(2) required- one per side
Made in USA
299.99- 1989-95 Ford HD subframe mount set
Greatly
improved design!
Genuine Ford OEM parts
Far superior to "Police" subframe mounts,
without the noise-vibration-harshness
of solid aluminum mounts.
Set of (4)
Made in USA
29.99- 1989-95 SHO- NOS Ford subframe mount/bushing
Genuine Ford parts- original design.
Sold individually-
(4)
required for 1989-92.
(2) required for 1993-95 (forward location only).
Made in USA (OEM Ford)
18.99- 1989-95 SHO- Aftermarket subframe mount/bushing
Aftermarket reproduction- original design.
Sold individually-
(4)
required for 1989-92.
(2) required for 1993-95 (forward location only).
18.99- 1989-95 FORD subframe mount recall kit
Includes:
(2) subframe bolts
(2) HD improved captive nuts
(2) HD plate
washers (not used with our HD bushings above)
(2) hole plugs (to plug top access holes for replacing captive nuts)
Detailed
instructions
Designed for rear subframe mounts, but hardware can be used at front mounts also
Made in USA (OEM Ford)
11.99- 1989-95 Ford subframe mount bolts
Galvanized
steel
Metric 10.9 hardness
Also great for mounting 3.0L-3.2L block to an engine stand!
Make
sure that your engine stand head allows full thread engagement
Bolts are ~3.75" long from under head to beginning of threads
(same
thread diameter and pitch as bellhousing bolts)
Set of (4)
Made in USA (OEM Ford)
24.99/pair- Moog HD Adjustable rear arm bushings
1989-95
Taurus/SHO/Sable sedan
Allow up to 2deg camber, 1.5deg toe change
Fine-tune your rear alignment!
Typical installation
consists of one pair per side
Made in USA
|
